Prescott’s Group Medical Divisions 
M1032A - Vuelink Intellivue Module
Model Number: M1032A
The Philips M1032A VueLink Module is a specialized communication interface designed to integrate external medical devices directly into the Philips clinical monitor network. This module acquires real-time information—including physiologic parameters, waveforms, device settings, and alarms—from a wide array of bedside devices such as mechanical ventilators, gas analyzers, and anesthesia machines. By centralizing this critical data on the primary patient monitor, the VueLink module simplifies clinical workflow and enhances decision-making.
Key Features and Benefits
- Seamless Integration: Displays up to two waves and six numerics from connected external devices directly on the Philips patient monitor screen, consolidating vital information in one place.
- Broad Device Compatibility: Connects with any medical device supporting the Open Interface Protocol or specific dedicated interfaces, including ventilators, gas analyzers, and multi-parameter measurement devices.
- Flexible Configuration: Multiple VueLink modules can be used with a single monitor to integrate data from numerous devices simultaneously. Device-specific settings are stored within the module, allowing for easy reconnection after transport without repeating setup.
- Comprehensive Data Display: Shows device type and name, alarm status, current device mode (e.g., CPAP), and up to 24 numerics in the VueLink window, maintaining a coherent and uncluttered presentation.
- System Compatibility: Fits standard M1041A module racks and works with Philips IntelliVue MP (MP20-MP90) and MX series (MX400-MX800), as well as CMS/Viridia systems.
Hardware Options and Configuration
To ensure proper communication, the M1032A module must be matched with the correct hardware option for the specific category of external equipment being used. Additionally, specific drivers and interface cables are required for each connected device.
- A01: Auxiliary Devices
- A02: Ventilators
- A03: Gas Analyzers
- A04: Anesthesia Machines
- A05: Auxiliary Devices
Pioneer Biomedical Support and Service
Pioneer Biomedical offers expert support for the Philips M1032A VueLink module. Whether you need assistance with driver installation, cable selection, or repairs for common issues like power or communication failures, our factory-trained technicians are ready to help. Contact Pioneer Biomedical today for sales, service, or technical support.
The Philips M1032A Vuelink Module is a communication module that allows other monitors or devices to interface with a Philips MP or MX series monitor. This allows parameters and readings to directly be shown on a Philips monitor. There are 5 different hardware options for these modules. You must get the correct options for your category. These categories are Auxiliary(A01), Vent(A02), Gas Analyzer(A03), Anesthesia(A04), Auxiliary(A05). This module needs to be be loaded with the specific driver for communication to work. It uses a specific cable for each external device it communicates with. We see most failures from this module in communication or power.
Helpful Files:
- Dead
- No communication with Monitor
- Needs correct driver installed
- Damaged Connector
Related Products
GE Datex Ohmeda E-PRESTN Hemodynamic Module
Mindray AG Module
453564453711, 185-0145-PH – BIS Cable, Hockey Puck, Power Link
Spacelabs Multiparameter Module 91496
Everything that comes out of our shop has been cleaned, serviced, and is ready for use.